Casters for Data Center Rack Solutions Enclosure, Uninstalled

This is a set of Heavy Duty Telescopic Rails for the Data Rack Center Solutions Enclosure. It is designed to support componenents from underneath the unit.

This is a set of replacement filters for Data Center Solutions Enclosures.

These mounting plates for your Data Center Solutions Enclosure are for mounting accessories on the vertical enclosure section or punched section. The mounting flange dimension is 17 x 73mm (0.66 x 2.87? ) on the inner and outer mounting level.

This Fan Kit is for the Rear Door in a Data Center Solutions Enclosure. There are two (2) fans per assembly which provide a total airflow of 210cfm. With today? s high heat loads inside server enclosures, it is critical to use thermal management techniques with optimized enclosure ventilation. Having vented front and rear doors and a vented roof, Powerware...

This is a Center Rack Mount Kit for mounting the Cisco 6513 in a 23" Telco-style rack (switch and rack available separately).

This 2U Enclosure Mount Manager with Hingeable/Removeable Cover gives you proper cable management which ensures optimum data transmission, cost savings and cable protection. The enclosure design provides for fully open sides and bottom to maximize cable management access capability. The perforated roof houses four 4.5? diameter cable access holes with grommets and plugs for easy overhead cable management.

The OPTIchannel FCR rack mount enclosures provide patching and fiber slack storage capability. FCR rack mount enclosures accept all FSP adapter panels. The "technician's side" has facilities for securing the cable, storing fiber slack and arranging and identifying the terminated fibers. The "user's side" has similar features for the management of fiber optic patch cords. Splice tray stud also accepts...

This is a NextFrame Center Rack Wall Bracket 10-pack. It is used to terminate a straight length of Center Rack to the wall. The material is mill finish 6065-T6 aluminum.

The NEXTFRAME Center Rack Straight Section can be used as an alternative to traditional ladder racks. It is made of mill finished aluminum. The kit includes: 2 straight sections (12'), 2 splice/handers, 4 3/8"x2" bolts, 4 3/8" lock washers, 8 3/8" flat washers.

This is a set of 3-inch locking casters for the ServCenter Rack from Black Box.