LightPulse 2Gb/s Fibre cPCI Host Bus Adapter with Embedded Multi-Mode Optic Interface (LC)
The LightPulse LP9002C Fibre Channel CompactPCI (cPCI) host bus adapter combines the new generation features and functionality of the 2Gb/s low profile LP9002L with the rugged Eurocard mechanics of the CompactPCI architecture. Like the LP9002L, the LP9002C provides support for 2Gb/s Fibre Channel data rates, delivering the industry’s highest performance. The LP9002C features automatic speed negotiation capability which allows complete compatibility with existing 1Gb/s Fibre Channel storage area networks (SANs), and allows seamless upgrades to higher speed 2Gb/s SANs.
The LP9002C provides a unique combination of features, including switched fabric support using F_Port and FL_Port connections, full-duplex data transfers, high data integrity features, support for all Fibre Channel topologies, and support for service class 2 and 3.
LP9002C also features sophisticated hardware that provides superior performance in SANs, delivering low latency and high throughput in switched fabric, arbitrated loop and clustered environments. Support for fiber optic cabling is provided through a small form factor (LC) optical embedded interface.
LightPulse 2Gb/s Fibre cPCI Host Bus Adapter with Embedded Multi-Mode Optic Interface (LC)
|
Performance
|
|
|
Data Transfer Rate
|
2 Gbps
|
|
Data Transfer Rate
|
1 Gbps
|
|
Compatibility Notes
|
3U cPCI form factor
Standards: ANSI Fibre Channel FC-PH ANSI Fibre Channel FC-AL ANSI Fibre Channel FC-PLDA ANSI Fibre Channel FC-FLA CompactPCI Specification Fibre Channel Class 2, 3
Software Environments: Initial deployment - Solaris (Sparc)
Hardware Environments: Sun Fire servers 3800, 4800, 4810
Optical Data Rates: 1.0625Gb/s / 2.125Gb/s Optics: Short wave lasers
Driver Support The LightPulse LP9002C is complemented by a rich suite of software support including storage protocol (SCSI), network protocol (IP) as well as concurrent multi-protocol (SCSI & IP) operation, enabling advanced Storage Area Network (SAN) implementations in the Solaris environment. The LP9002C driver is also fully compatible with the Emulex LP9002L, LP9000, LP8000, LP7000E, LP952L and LP850 PCI host bus adapters. It also shares a commmon source base with drivers for the LP9002S and LP8000S, allowing a common look and feel across separate hardware platforms.
|
|
Contents
|
Unit, documentation
|
|
Memory Notes
|
Emulex Centaur ASIC technology 2MB FLASH memory 1MB code RAM 256KB buffer RAM
|
|
Physical Dimensions
|
4"h x 6.4"d
|
|
Ports/Connectors
|
Cable: 50 / 125µm multi-mode fiber 62.5 / 125µm multi-mode fiber Connector Type: LC Distance (1 Gb/s) 500 meters (1640') 50 / 125 µm fiber 300 meters (984') 62.5 / 125 µm fiber Distance (2 Gb/s) 300 meters (984') 50 / 125 µm fiber 150 meters (492') 62.5 / 125 µm fiber
|
|
Power Notes
|
Power Requirements
Volts: +3.3VDC, +5VDC Power: 7.2 watts typical (9.3w max)
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
N/A
|
|
Warranty - Parts
|
N/A
|
LightPulse 2Gb/s Fibre cPCI Host Bus Adapter with Embedded Multi-Mode Optic Interface (LC)
http://www.macconnection.com/IPA/Shop/Product/Detail.htm?sku=5193729#BVSecondaryCustomerRatings