Cable Runway Mount Platform

This is a cable runway mounting bracket for attaching 6" to 24" wide CPI Cable Runways to the top of the Adjustable ServerRack or Adjustable QuadraRack. It aligns with the front, rear, or side of the rack.

This Cable Runway Elevation Kit for rack installation can be installed using 4", 5" or 6" elevation, and parallel or perpindicular mounting. Rack kits attach to the top of the rack with a Rack-To-Runway Mounting Plate (P/N 10595 or 12121, sold separately).

This Cable Runway Radius Drop mounts to a cross member to help maintain a proper Category 5/5e/6 or fiber bend radius. This product features quick and easy installation using clevis pin attachment, and it provides a 3" bend radius.

This Cable Runway Movable Cross Member permits the dropping of cables at any point between cross members of 12" cable runways. This Cross Member may be used alone or with a compatible Chatsworth Products, Inc., Cable Runway Radius Drop. Installation is quick and easy with the included hardware.

The Cable Runway Radius Drop mounts to a cable runway cross member to help maintain proper Category 5, 5e, 6 or fiber bend radius. It features quick and easy installation using a clevis pin attachment. It is for use on a CPI Universal runway (Series 10250), or it may be used on other runway series with Cable Runway Movable Cross...

This Cable Runway Triangular Support Bracket in Black supports cable runway width between 6 and 12 inches. Its capacity is 100 lbs. The material for the bracket is 1/4" x 2" 6063-T5 aluminum bar, and the kit consists of (1) triangular bracket, (2) 5/16-18 x 2 1/4" J-bolts, (2) 5/16-18 hex nuts and (2) 5/16 lock washers.

Mounts to cable cross member to help maintain proper Category 5/5e/6 or fiber bend radius. Quick and easy installation using clevis pin attachment. Designed for use with runs on CPI Universal runway. May be used on other runway series with Cable Runway Movable Cross Member (12115 series).

This cable runway standoff support kit allows the attachment of cable runway 12" directly above and either parallel or perpendicular to existing cable runway. Each kit consists of the following items: two steel angle pieces, four steel brackets, and eight sets of nuts, bolts, and washers.

This is an elevation kit for elevating cabinets from 4" to 6". It also provides additional space between the tops of the cabinets and the cable runway, which can be used to create smoother vertical to horizontal transition of cables.

This kit is designed for supporting Cable Runway above a continuous row of CPI racks or cabinets of varying height. It also provides additional space between the tops of the racks or cabinets and the cable runway, which can be used to create smoother vertical to horizontal transition of cables.