PatchRack for Cable Runway, 4U, 19”w

This UL-listed Cable Runway is 12" wide, and its overall length of 9' 8-1/2" complies with TELCO-style standards. Sections are individually boxed to prevent scratching and damage.Side stringer dimensions: 1.5"h x 0.375"wCross member dimensions: 0.5"h x 1"w x 12"lCross members are welded to side stringers in 9" intervals.

The CPI Cable Runway Wall To Rack Kit is a one part number solution to the problem of providing support for cable between the rack and the wall. This kit is designed for use when attacking to a Standard and/or Universal seriesl rack with a 3" deep mounting channel. It is finished with a black powder paint coat. Rack is...

This 12" Wide 90-Degree Cable Runway E-Bend creates a 90 degree gradual sweep in horizontal plane for cable runway runs. It is designed for cabling in conformance with Category 5 minimum bend radius requirements (typically 4 times the cable diameter). Made of lightweight 1-1/2" x 3/8" tubular steel to fitstandard cable runway. Cross members welded at approximately 23 degree increments.

This is a mount platform for select Chatsworth cable runways.

This Cable Runway Radius Drop mounts to a cross member to help maintain a proper Category 5/5e/6 or fiber bend radius. This product features quick and easy installation using clevis pin attachment, and it provides a 3" bend radius.

This cable runway standoff support kit allows the attachment of cable runway 12" directly above and either parallel or perpendicular to existing cable runway. Each kit consists of the following items: two steel angle pieces, four steel brackets, and eight sets of nuts, bolts, and washers.

The Cable Runway Radius Drop mounts to a cable runway cross member to help maintain proper Category 5, 5e, 6 or fiber bend radius. It features quick and easy installation using a clevis pin attachment. It is for use on a CPI Universal runway (Series 10250), or it may be used on other runway series with Cable Runway Movable Cross...

Cable Runway Pathway Dividers divide a cable runway into multiple cable pathways. You can use Cable Runway Pathway Dividers to organize cables according to media type or destination. This is the ideal pathway solution over racks and cabinets within the equipment room and telecommunications rooms because it is open on both sides and at the bottom to allow backbone and...

This Cable Runway Triangular Support Bracket in Black supports cable runway width between 6 and 12 inches. Its capacity is 100 lbs. The material for the bracket is 1/4" x 2" 6063-T5 aluminum bar, and the kit consists of (1) triangular bracket, (2) 5/16-18 x 2 1/4" J-bolts, (2) 5/16-18 hex nuts and (2) 5/16 lock washers.

This cable runway is designed for value conscious customers. With the runway supported every five feet, maximum load with minimal deflection is 135 lb/ft. The runway is made of 3/8" x 1-1/2" x 0.65" wall rectangular steel tubing. Cross members are welded at 12" intervals.