2-Port 2nd gen Multiflex Trunk Voice WAN Interface Card - T1 E1

The second-generation 2-port T1/E1 multiflex trunk (MFT) voice/WAN interface cards (multiflex VWICs) support data and voice applications in Cisco multiservice routers. The multiflex VWIC combines WAN interface card (WIC) and voice interface card (VIC) functionality.The 2-port MFT VWIC2s can enable each port to be clocked from independent clock sources for data applications. This independent clocking capability is not supported for...

This is a refurbished product.This flexible, multiservice solution supports multiple data, voice, and integrated data and voice applications, facilitating the migration from data only or channelized data and voice to packet voice solutions and simplifying deployment, management, and sparing.To maximize the performance of your Cisco hardware, Cisco strongly recommends Cisco SMARTnet Support. SMARTnet provides you with technical support, access to...

The second-generation 1-port T1/E1 multiflex trunk (MFT) voice/WAN interface cards (multiflex VWICs) support data and voice applications in Cisco multiservice routers. The multiflex VWIC combines WAN interface card (WIC) and voice interface card (VIC) functionality.All MFT VWIC2 modules now include the drop and insert multiplexing capability, which eliminates external third party CSU/DSUs and drop and insert multiplexers.To maximize the performance...

This 2-port DID voice/fax interface card is used to provide off-premises DID connection from central office. It serves only incoming calls from the PSTN and supports caller ID.Cisco IP Communications voice/fax network modules support either one or two Cisco voice interface cards (VICs) or Cisco voice/WAN interface cards (VWICs) and install into network module slots for the Cisco 2600XM Series,...

This is a Cisco 2-port FXS and DID voice/fax interface card. The enhanced FXS port is able to connect directly to phones, fax machines, and key systems with a loop length up to 11,000 feet (3.3 km). The card generates battery polarity reversal and caller ID, and it also provides an off-premises DID connection from the central office. It also...

The Cisco 2-Port T1/E1 Protection Switching RAN VWIC is an integral part of the Cisco RAN Optimization Solution. The Cisco T1/E1 RAN VWIC supports traditional T1/E1 communications and it features advanced processing for applications such as the Cisco RAN Optimization Solution and circuit emulation over packet or standard-based Pseudowire Emulation Edge to Edge (PWE3). For example, the VWIC enables the...

Cisco Multiflex Trunk Dedicated Echo Cancellation (MFT ECAN) Modules are dedicated resources for the Cisco Enhanced ITU-T G.168 ECAN feature, providing robust echo cancellation performance for demanding network environments. The modules are daughter cards that attach to Cisco Second-generation Multiflex Trunk Voice/WAN Interface Cards. The dedicated ECAN modules are available in 32-channel configurations, which match the requirements of the 1-port...

The Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card provides n x T1/E1 connectivity in a compact form factor and reduces deployment and management costs.As more data and voice services are enabled in branch offices, the demand for WAN bandwidth increases accordingly. Multilink Point-to-Point Protocol (PPP) and Multilink Frame Relay enable customers to scale their leased lines from single...

Serial and asynchronous high-speed WAN interface cards (HWICs) provide highly flexible connections for Cisco 1800, 2800, and 3800 Series Integrated Services Routers. This HWIC helps customers enable applications such as WAN access, legacy protocol transport, console server, and dial access server. You can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management,...

This 2-port E&M voice/fax interface card is used to connect to PBX or key system as tie lines.Cisco IP Communications voice/fax network modules support either one or two Cisco voice interface cards (VICs) or Cisco voice/WAN interface cards (VWICs) and install into network module slots for the Cisco 2600XM Series, Cisco 2691, and Cisco 3600 and 3700 series voice gateway...