Intellislot Dry Contact Relay Output for Custom-wired Applications and AS 400 Support

The APC Dry Contact I/O Accessory provides a hardware interface for connecting the host device of a Network Management Card 2 (AP9631 or AP9635, available separately) with peripheral devices. The Dry Contact I/O Accessory includes: Inputs (labeled Zones A and B) for two dry contact devices, One 12V, 25mA power output (labeled Pwr), One Form C relay (relay outputs labeled...

This dry contact cable is for use with Netbotz's environmental, power and security monitoring devices. It is 15 feet long, and has a DIN connector to two bare wires.

Allows you to connect a dry contact alarm from any device to your IMS-4000 Host or Node. The Dry Contact Bridge is compatible with Normally Open and Normally Closed contacts. The sensor may be mounted either on a wall or rest on the floor.

The Liebert IntelliSlot IS-WEBRT3 Card delivers enhanced communications and control to the Liebert PSI RT3 UPS. The cards employ an Ethernet network to monitor and manage a wide range of operating parameters, alarms and notifications.

This is a universal sensor that monitors third-party dry contact state sensors. It is automatically detected by NetBotz appliances and can be extended with standard Cat5/Cat6 cable up to 100 feet.

The dry contact sensor responds with an ALARM/NORMAL indication in software. A user can have an unlimited number of dry contacts sensors. Dry contact sensors are user definable and can be used to detect many different inputs such as UPS status, security systems, and air conditioning status. When an alarm condition is activated the description and location of the fault...

The dry contact sensor responds with an ALARM/NORMAL indication in software. A user can have an unlimited number of dry contacts sensors. Dry contact sensors are user definable and can be used to detect many different inputs such as UPS status, security systems, and air conditioning status. When an alarm condition is activated the description and location of the fault...

The AlertWerks II ServSensor V4P with 20 Dry-Contact Inputs enables you to integrate environmental sensors and surveillance cameras into one seamless remote monitoring system that watches over your premises. Use it to monitor data centers, offices, or anywhere it's important to keep an eye on conditions on the ground.

Monitor a device equipped with a relay output that functions as an alarm. Senses a definite yes/no input from a normally open or normally closed output, and sends an alarm when the yes or no condition is sensed.PRODUCT FEATURES:Input: normally open or normally closed,Source/sense voltage: 14 VDC,Source/sense current: 10 mA,Connector: RJ-45,Temperature: 32? F to 122? F (0? C to 50?...

2600/3600 Series Dry Contact Closure Net Module.This is a Cisco manufacturer-refurbished item available in limited quantities while supplies last.