13" Wide Cable Runway Wall to Rack Kit for Standard Universal Racks w 3" Deep Mounting Channel

This 12" Wide 90-Degree Cable Runway E-Bend creates a 90 degree gradual sweep in horizontal plane for cable runway runs. It is designed for cabling in conformance with Category 5 minimum bend radius requirements (typically 4 times the cable diameter). Made of lightweight 1-1/2" x 3/8" tubular steel to fitstandard cable runway. Cross members welded at approximately 23 degree increments.

This UL-listed Cable Runway is 12" wide, and its overall length of 9' 8-1/2" complies with TELCO-style standards. Sections are individually boxed to prevent scratching and damage.Side stringer dimensions: 1.5"h x 0.375"wCross member dimensions: 0.5"h x 1"w x 12"lCross members are welded to side stringers in 9" intervals.

The PatchRack is a miniature two-post rack that can be attached to CPI Cable Runway to save rack-mount space by placing patch panels or interconnect equipment above the rack or cabinet. Attach to a cross member underneath the cable runway.

This popular cable runway is designed for value conscious customers. This basic Cable Runway offers the industry standard features you? ve come to expect. With the runway supported every five feet, maximum load with minimal deflection is 132 pounds per foot. The runway is made of 3/8" x 1-1/2" x .065" wall rectangular steel tubing. Cross members are welded at...

This Cable Runway Movable Cross Member permits the dropping of cables at any point between cross members of 12" cable runways. This Cross Member may be used alone or with a compatible Chatsworth Products, Inc., Cable Runway Radius Drop. Installation is quick and easy with the included hardware.

The Cable Runway Radius Drop mounts to a cable runway cross member to help maintain proper Category 5, 5e, 6 or fiber bend radius. It features quick and easy installation using a clevis pin attachment. It is for use on a CPI Universal runway (Series 10250), or it may be used on other runway series with Cable Runway Movable Cross...

This Cable Runway Triangular Support Bracket in Black supports cable runway width between 6 and 12 inches. Its capacity is 100 lbs. The material for the bracket is 1/4" x 2" 6063-T5 aluminum bar, and the kit consists of (1) triangular bracket, (2) 5/16-18 x 2 1/4" J-bolts, (2) 5/16-18 hex nuts and (2) 5/16 lock washers.

You attach the PatchRack to the side of the cable runway to create a space above the equipment cabinets for patch panels and interconnect equipment. Cabinets can be repositioned easily because only the cables between the PatchRack and the cabinet are affected.

This is 25-pack of Single Black Universal or Trough Style Cable Runway Pathway Dividers.Cable Runway Pathway Dividers divide Cable Runway into multiple cable pathways. Use Cable Runway Pathway Dividers to organize cables supported by Cable Runway according to media type or destination.Cable Runway is the ideal pathway solution over racks and cabinets within the equipment room andtelecommunications rooms because it...

This steel support angle is cut and drilled for wall mounting specific widths of cable runway.